DIY Render or Stucco Over that Tired Brickwork

Stucco Over Brick

It sounds like an option in rock paper scissors: stucco over brick. But stucco has a place in many hearts and homes. Brick is a sturdy house material that lasts for as long as a home is standing. While that is the case, it is not the favorite look of many people.

Some are not in love with having deep lines on their home. It catches dirt, and some are more partial to smooth surfaces. For others, it is a dated look. Or, they just have a different stylistic look in mind.

Either way, there are ways to stucco a home to cover up the brick by using render sprayer. Stucco is a versatile thin plaster material, and it is excellent for covering up everything from brick to the concrete block. It is both a way to modernize while removing an unwanted  look without having to remove actual stones or brick from a building’s structure.

Stucco is weather resistant and is able to take color well. It can also be put over wood walls in three coats. Meanwhile, it takes two coats to cover brick or stone. If you are covering an existing brick or cinderblock home, you need to ensure that you clean the exterior first.

If you are familiar with stucco, you may know that there are many layers to get started if you know how to apply render or this fine plaster layer to a wood wall. It requires two layers of grade D waterproof building paper, and metal lathe, all nailed into place by galvanized nails to prevent rusting or breakage.

When covering brick you will have to be prepared to cut the brick overhang out of the way, if a more seamless look is desired. Sometimes you will have to install trim to achieve a clean edge. Such trim will also play the role of drainage and may be pitched downward to help the process. Such trim is generally fabricated out of metal lathe but is less flexible so it holds a corner shape well.

Stucco base and stucco with water base come dry, ready to be mixed. They are workable and bond well to materials, including brick. Mix it with water according to package directions. Once you can hold up the stucco at a 90-degree angle without it sliding off a tool, it is ready to be applied.

An 80-pound bag will cover 27 feet at 3/8 inches thickness. Wet the wall with a spray of water. Lift the material onto a trowel and force and spread it up the wall to 3/8 inch. Smooth it out with a darby or edge.


Apply a second coat with the color added to 1/8 inch thick. After exploring this as a do-it-yourself project, you may wish to hire a licensed render or stucco contractor using stucco sprayer to take over the task for you. Though, it is always a good idea to check out videos and images of the type of work you are looking to have done on your house.

If nothing else, it will build your appreciation of the work involved. Additionally, it will illuminate questions to ask your future contractor.